Onicon F-3200 Series Instrukcja Użytkownika Pobierz pdf (Strona 27)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-3200 Flow Meter Manual 05/14 - 0671-12 / 18325 Page 27

3.3.3 Power and Output Signal Wiring Instructions

Factory Default Output Congurations

ONICON pre-programs the analog and pulse outputs based on application specic data

provided at the time the meter is ordered. The tables on the next page show how the pulse

outputs are congured based on whether the application has bi-directional ow and if the

meter will be connected to an ONICON peripheral device such as an ONICON BTU meter

or display module.

In all applications the analog 4-20 mA output is available at:

Analog Output #1: terminals 9 (+) and 10 (-).

Analog Output #2: terminals 28 (+) and 20(-) - Optional output available only if

the meter was ordered with the redundant output option.

Application Pulse Output #1

Terminals: 16 (+) & 17 (-)

Pulse Output #2

Terminals: 18 (+) & 19 (-)

Standard Frequency Scaled Pulse

Bi-directional *Scaled Output Flow Direction

* This output will be congured for frequency if the ow meter is provided with a peripheral device.

Optional Auxiliary Pulse Outputs

Application Pulse Output #3, Terminals: 22 (+) & 21(-) Pulse Output #4, Terminals: 30(+) & 29(-)

Standard Flow Direction OFF

Bi-directional Flow Direction OFF

* This output will be congured for frequency if the ow meter is provided with a peripheral device.

Pulse Out 1

Pin 16 - Pos (+)

Pin 17 - Neg (-)

Pulse Out 2

Pin 18 - Pos (+)

Pin 19 - Neg (-)

4-20 mA Output 1

Pin 9 - Pos (+)

Pin 10 - Neg (-)

SIGNAL CONNECTIONS

Step 1: Remove the 4 Allen screws using a 5mm

Allen wrench.

Step 2: Remove the cover exposing the

connection terminals.

Step 3: Make SIGNAL connections as shown

Pull straight out on connectors to remove them.

Pulse Output 1 / 2 / 3 / 4

Opto-coupled open collector pulse outputs

Maximum voltage: 40VDC

Maximum current: 100mA

Maximum saturation voltage

collector/emitter @ 100mA: 3 VDC

Maximum Frequency: 1,250 Hz

connection terminals

AUX SIGNAL CONNECTIONS

4 - 20 mA Output 2

Pin 28 - Pos (+)

Pin 20 - Neg (-)

Pulse Out 3

Pin 22 - Pos (+)

Pin 21 - Neg (-)

Pulse Out 4

Pin 30 - Pos (+)

Pin 29 - Neg (-)

16 (out1)

18 (out2)

22 (out3)

30 (out4)

17 (out1)

19 (out2)

21 (out3)

29 (out4)

CAUTION

The transmitter earth connection at the input voltage terminals and the sensor body earth terminals

must both be connected to earth to ensure proper operation.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

Onicon F-3200 Series Instrukcja Użytkownika Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Onicon F-3200 Series